Getting out of hobby, some nice models for sale

Any goods to buy, sell or trade between SOGGI members.
Forum rules
To attach a photograph to your message, use the "Upload Attachment" tab that appears below the "New Topic" and/or "PostReply" forms
Post Reply
Paul F
Posts: 5
Joined: Sun Mar 15, 2015 4:52 pm

Re: Getting out of hobby, some nice models for sale

Post by Paul F » Wed Feb 12, 2020 8:35 pm

Hello Marc,

The Ka8 almost NIB reserved for you. Email sent.

Marcus F
Posts: 3
Joined: Fri May 22, 2015 2:25 pm

Re: Getting out of hobby, some nice models for sale

Post by Marcus F » Wed Feb 12, 2020 12:06 pm

Hi Paul,
I'd like the nib Ka8, if its still available.
Marc

Paul F
Posts: 5
Joined: Sun Mar 15, 2015 4:52 pm

Re: Getting out of hobby, some nice models for sale

Post by Paul F » Wed Feb 12, 2020 9:49 am

Hi Terry,
The Lunak and Park 450 are reserved for you. Email sent.

Terry D
Posts: 3
Joined: Sat Apr 18, 2015 5:59 pm

Re: Getting out of hobby, some nice models for sale

Post by Terry D » Mon Feb 10, 2020 11:57 pm

Hi Paul. As emailed yesterday I want to buy the Lunak and the Park 450 motor as priced

Paul F
Posts: 5
Joined: Sun Mar 15, 2015 4:52 pm

Re: Getting out of hobby, some nice models for sale

Post by Paul F » Mon Feb 10, 2020 6:12 pm

The e-AVA lot is spoken for.

Paul F
Posts: 5
Joined: Sun Mar 15, 2015 4:52 pm

Getting out of hobby, some nice models for sale

Post by Paul F » Sun Feb 09, 2020 4:14 pm

Post updated 2019.02.20
acknowledgments added
Top Model Thermic Dream comment updated and related photo added

I have come to the realization that I won't be able to continue with the hobby of rc soaring - I haven't flown at a SOGGI sod field since 2015. I have some very nice "NIB" and very good condition models that I would like to sell - I'd prefer to sell each as a lot. If you're interested, send me a message or contact me at (paulfinlayatrogersdotcom). I could deliver at SOGGI club meeting in March, or at your convenience if not far from GTA.

Best Regards,
Paul Finlay
MAAC 8755


Thermal Gliders

E-Ava 4m 'NIB'
Vladimir, Red surfaces, includes ballast & HyperFlight travel bag $1100
Powerline 1025 (28mm geared inrunner, intended for F5J) $275
YEP 60A ESC (includes programming card) $40
CAM (ALES) $40
Servos MKS DS6100 (4) $35 ea
servo mount (Servorahmen) for DS6100 (2x2 pack) $10 ea.
GM 16x8 (1 pair) carbon folding prop $25
GM 15x8 (1 pair) carbon folding prop $25
Spinner 38/5/0 (Vladimir, folding) $25
Lot $1400 (value approx. $2300+shipping+tax+customs)
Sold! Thank You

E-Thermik Dream 3m 'NIB' post updated 19.02.20
(photo from internet added 19.02.20 is slope soaring variation 'Diva'. Thermik Dream identical but e-launch)
Top Model $300
Turnigy SK3 GliderDrive 4.6 840Kv $35
Turnigy Plush 60A $40
CAM (ALES) (1) $40
Servos Power HD 1711MG (18g) (3) $7 ea.
Servos Corona DS-939MG (13g) (3) $7 ea.
HK 12x8 (1 pair carbon folding prop) $10
CamCarbon 12.5x7.5 (1 pair carbon folding prop) $10
Spinner 40/5 (Top Model) $10
Lot $450 (value approx. $700+shipping+tax+customs)


Cirrus 3m
Graupner Kit
Fuselage and tail surfaces only assembled in mid '70s, not covered or painted, all kit parts, plans, instructions and original box present, photos if requested.
$150

Power Aircraft Kit

Shaft 400 1m
Stevens Aeromodel kit NIB $100
E-flite Park 450 890 Kv $40 - Sold! Thanks Terry.
ESC Turnigy AE-25a $10
rx Spektrum AR635 $25
Servos HiTec HS5055MG (2) $10 ea.
Servos Spektrum DSP75 (2) $10 ea.
Lot $140 w/o motor

Slope Gliders

Cularis 2.5m
Multiplex, pnp, very good condition. This was assembled with plenty of glue for slope flying but includes 2 folding prop spinners. Servos are Corona, EMAX and Turnigy. Turnigy UBEC-5A included. Never flown.
$175

Ka8 2.2m
Park Zone, pnp, excellent as new condition, includes modified storage box + spoiler quick connection mod. Flies so nicely.
$125

Ka8 2.2m
Park Zone, pnp, almost NIB, never flown.
$125 - Sale Pending

Lunak 2m
Hacker CZ, bnf rx Lemon 6ch, Turnigy UBEC-5A, servos EMAX ES08MDII (4), excellent condition, never flown.
$125 - Sold! Thanks Terry.
You do not have the required permissions to view the files attached to this post.
Last edited by Paul F on Thu Feb 20, 2020 4:07 pm, edited 7 times in total.

Post Reply